Home > Brazing > Induction Brazing

Induction Brazing

In addition to the general benefits induction heating brings to virtually any heating process, there are very specific reasons to use induction heating for industrial brazing. These include selective heating, better joint quality, reduced oxidation and acid cleaning, faster heating cycles and more consistent results.

Selective Heating

Induction heating can be targeted to provide heat to very small areas within tight production tolerances. Only those areas of the part within close proximity to the joint are heated; the rest of the part is not affected. Since there is no direct contact with the part, there is no opportunity for breakage. The life of the fixturing is substantially increased because problems due to repeated exposure to heat (such as distortion and metal fatigue) are eliminated. This advantage becomes particularly important with high-temperature brazing processes.

With efficient inductor design, careful fixturing and consistent part placement, it is possible to simultaneously provide heat in different areas of the same part.

Induction Brazing Produces Better Quality Joints

Induction heat produces clean, leakproof joints by preventing the filler from flowing in areas that it shouldn't. This ability to create clean and controllable joints is one of the reasons that induction brazing is being used extensively for high-precision, high-reliability applications.

Induction brazing produces cleaner parts.Reduced Oxidation And Cleaning

Flame heating in a normal atmosphere causes oxidation, scaling and carbon build up on the parts. To clean the parts, applications of joint-weakening flux and expensive acid cleaning baths have traditionally been required. Batch vacuum furnaces solve these problems, but have significant limitations of their own because of their large size, poor efficiency and lack of quality control. Brazing with induction reduces both oxidation and costly cleaning requirements, especially when a rapid cool-down cycle is used.

Fast Heating Cycles

Because the induction heating cycle is very short in comparison to flame brazing, more parts can be processed in the same amount of time, and less heat is released to the surrounding environment.

Consistent Results

Induction brazing is a very repeatable process because variables such as time, temperature, alloy, fixturing, and part positioning are very controllable. The internal power supply of the RF power supply can be used to control cycle time, and temperature control can be accomplished with pyrometers, visual temperature sensors or thermocouples.

For processes which involve medium to high production runs of the same parts, an automated part handling system is often utilized to further improve consistency and maximize productivity.

For the most part, induction brazing and soldering is done in an open-air environment but it can also be done in a controlled atmosphere when necessary to keep the parts completely clean and free of oxidation.

Induction brazing generally works best with two pieces of similar metal. Dissimilar metals can also be joined by induction heating but they require special attention and techniques. This is due to differences in the materials' resistivity, relative magnetic permeability and coefficients of thermal expansion.

Read More About Specific Induction Brazing Applications

Please visit our Applications Research Database to review lab reports for applications such as brazing hydraulic hose assemblies, brazing stainless steel orthodontic parts and brazing copper tube assemblies.

Major Induction Heating Benefits

Optimized consistency

Maximized productivity

Improved product quality

Extended fixture life

Environmentally sound

Reduced energy consumption

GH IA logo

Innovative Induction Heating

induction heating solutions